In combination with the fire-rated doors used in nearly all elevators, our elevator smoke containment curtains provide comprehensive and code-compliant smoke and draft opening protection. These units are easy to install in elevator openings and integrate seamlessly with existing fire protection systems to quickly bring a structure up to code.
· Elevator hoistway opening sizes
M200: 42 inches and 48 inches only
M400: up 60 inches wide
· Ceiling Height
M200: Up to 10 feet high
M400: Up to 10 feet high standard, up to 12 feet high custom (4'7" wide x 12' tall)
· Unit return sizes (projection from wall)
M200: 1 inch
M400: 1/2, 3/4, and 1 inch
· Housing dimensions
M200: Housing Lengths: 55 and 64 inches • Height: 10.5 inches • Depth: 9 inches (plus return)
M400: Housing Lengths: 55, 64, and 73 inches • Height: 10.5 inches • Depth: 9 inches (plus return)
· Unit electronic control
Integrated and located in housing of the unit.
· Emergency power source
No internal emergency power source. Unit is fail safe and will deploy if primary power disrupted for several seconds. Unit can be connected to emergency power.
· Protection from temporary power failures
M200 and M400: A brief delay avoids nuisance deploys.
· Screen rewind switch
Yes, located on both sides of curtain.
· Screen deploy switch
M200 and M400: Yes, located on controls inside housing.
· Stainless steel auxiliary rails
M200: Auxiliary rails are standard.
M400: Rails optional, if elevator frame is ferrous and at least 2" wide. All Models: If rails are used, they can be painted to match or left unpainted